LevelOne FCS-5044 - Page 51

Network Camera User’s Manual
51/63
either one or all of them.
(1)“Email” Select to send the media files via email when a trigger is activated.
-- “Email security mode” : If your SMTP server requires a secure connection
(SSL or TLS), check This server requires a secure connection (SSL or TLS).
--“Server address” Enter the domain name or IP address of the email server.
--“Server port” The default mail server port is set to 25. You can also
manually set another port.
--“User name” Enter the user name of the email account if necessary.
--“Password” Enter the password of the email account if necessary.
--“Sender email address”: Enter the email address of the sender.
--“Recipient email address”: Enter the email address of the recipient.
(2)”FTP”
-- “FTP Server address” Enter the domain name or IP address of the FTP
server.
-- “FTP Server port” By default, the FTP server port is set to 21.
-- “User account” Enter the login name of the FTP account.
-- “User password” Enter the password of the FTP account.
-- “FTP folder name” Enter the folder where the media file will be placed. If
the folder name does not exist, the Network Camera will create one on the FTP.
(3)”HTTP ”
-- “URL” Enter the URL of the HTTP server.
-- “Http server port ” The default http server port is set to 80.
-- “User account” Enter the user name if necessary.
-- “User password” Enter the password if necessary.
-- “HTTP folder name” Enter the folder where the media file will be placed.
(4)”NAS”
--“Enable cyclic” The cyclic recording function is enabled, during the
transaction stage when a storage space is full and the incoming streaming data
is about to overwrite the previously saved videos.
--“NAS server address” Enter IP address of the NAS server.
--“NAS shared directory” Enter the NAS shared directory path.
--“Workgroup” Enter the NAS workgroup parameter.
--“User account” Enter the login name of the NAS account.
--“User password” Enter the password of the NAS account.