Network Camera User’s Manual
56/63
4. “Export/Import file” Advanced Mode
-- Export setting backup file: Click to export all parameters for the device and
user-defined scripts.
-- Upload setting backup file: Click Browse… to upload a setting backup file. Please note
that the model and firmware version of the device should be the same as the setting
backup file. If you have set up a fixed IP or other special settings for your device, it is not
suggested to upload a settings backup file.
5. “Upgrade firmware”
(1)The file is in .pck file format.
(2)Click Browse… and specify the firmware file.
(3)Click Upgrade. The Network Camera starts to upgrade and will reboot
automatically when the upgrade completes. When upgrade firmware please wait
for 210~360 seconds, and then you can connect to Network Camera again. The
system will restart and require the installer program to set up the network again.
Warning: The upgrade firmware procedure cannot be interrupted. If the power
and/or network connection are broken during the procedure, it might possibly
cause serious damage to the Network Camera.
To Next Page
Loading...
