LevelOne GEP-2450 - Page 110

102
 Diagnostic LED:
System LED :
Power
Per Port LED:
10/100/1000M TP Port 1 to 20
: LINK/ACT, SPD
1000M SFP Fiber Port 21 to 24
: LINK/ACT, SPD
 Power Requirement : AC Line
Voltage
: 100
∼
240 V
Frequency
: 50
∼
60 Hz
Consumption
: 16W
PoE Max.
: 185W
 Ambient Temperature
: 0
°
to 40
°
C
 Humidity
: 10% to 90%
 Dimensions
GEP-2450
: 44(H)
×
442(W)
×
170.3(D) mm
 Comply with FCC Part 15 Class A & CE Mark Approval
Management Software Specifications
System Configuration
Auto-negotiation support on 10/100Base-TX
ports, Web browser can set transmission speed
(10/100Mbps) and operation mode (Full/Half
duplex) on each port, enable/disable any port,
set VLAN group, set Trunk Connection.
VLAN Function
Port-Base / 802.1Q-Tagged, allowed up to 10
active VLANs in one switch.
Trunk Function
Ports trunk connections allowed
Quality of Service (QoS)
Referred as Class of Service (CoS) by the
IEEE 802.1P standard
Two queues per port
Network Management
Web browser support based on HTTP Server
Note: Any specification is subject to change without notice.