Parameter description:
Mode:
Controls whether Loop
Detection is enabled (as a whole).
Unlock Time:
The period (in seconds) for which a port will be kept disabled in the event
of a loop is detected (and the port action is to shut down the port).
State:
Show the status on the port.
Protocol Enabled:
Controls whether Loop Detection is enabled on this switch port.
When Port No is chosen and enable port' s Loop detection, the port can
detect loop happens and port will be Locked. If Loop did not happen, port
maintains Unlocked.
Unlock port:
When ticking the port, port locked will be opened and turned into
unlocked. If not ticking the port, Port maintains locked.
To Next Page
Loading...
