Parameter description:
Mode:
Controls whether Broadcast Strom Protection is enabled (as a whole).
Packet Per Second:
It is a threshold. When the broadcast packet traffic in a second is higher
than the threshold configured, the Broadcast Strom Protection enable.
Unlock Time:
The period (in seconds) for which a port will be kept disabled in the event
of a loop is detected (and the port action is to shut down the port).
State:
Show the status on the port.
Protocol Enabled:
Controls whether Broadcast Strom Protection is enabled on this switch
port.
Unlock port:
When ticking the port, port locked will be opened and turned into
unlocked. If not ticking the port, Port maintains locked.
To Next Page
Loading...
