is 3. The available range is 1 to 5.
Failure Log:
To display the PD’s Ping result and log. Note down “Ping Check” a result of
movement after starting. The error means switch to ping the PD is failure or total
means total switch to do ping frequency.
Failure Action:
To set up when PD is failure and switch action command. The values are “Nothing”
and “Reboot Remote PD”.
Nothing: The switch detects that PD occurs failure and do nothing.
Reboot Remote PD: The switch detect that PD occurs failure and then reboot it.
Reboot Time:
The switch ping check PD failure “P.O.E” restarts the buffer time of switch. The
default is 15 seconds. The available range is 3 to 255 seconds..75
To Next Page
Loading...
