Parameter description:
PoE on:
Logical port which to configure power supply.
Schedule mode:
Enable / Disable PoE Scheduling.
Port:
Local port number.
Schedule mode:
This is the showing the PoE Scheduling mode of logical port, √ is enable;
blank is disable.
Group setting:
Configure multiple logical ports as same configuration. But schedule
mode should be setting by per port.
Copy scheduling:
To easy copy the port scheduling to another one.
Week Day (Sun., Mon.,… )
The days of PoE port provide power of a week.
Hour:
The time of PoE port provide power of a day.
Button:
Apply- Click Apply to apply the change.
Note: The PoE Scheduling will be disabled automatically when NTP sync time
server failure happened.
To Next Page
Loading...
