20
3.1.2 Wireless
Wireless settings allow you to set the WLAN (WiFi) configuration items. When the
wireless configuration is done your WiFi LAN is ready to support your local WiFi
devices such as your laptop PC, wireless printer and some portable wireless
devices.
There are 2 RF Modules on this device.
RF Module1 is 2.4GHz Wireless Module and RF Module2 is 2.4G Selectable
Module.
3.1.3.1 Wireless Setup
There are several wireless operation modes provided by this device. They are: “AP
Only Mode”, “WDS Hybrid Mode”, “WDS Only Mode”, and “Universal Repeater
Mode”. You can choose the expected mode from the list.
3.1.3.1.1 AP Only Mode
When acting as an access point, this device connects all the wireless stations to a
wired network and the WAN Port is disabled consequently.
To Next Page
Loading...
