LevelOne WBR-6003 - Virtual Computers (Only for Static and Dynamic IP Address WAN Type)

29
Virtual Computers (Only for Static and dynamic IP address WAN type)
Used when WAN is set as DHCP or Static IP, the user can assign a global IP address to a LAN IP
Address.
Virtual Computer enables you to use the original NAT feature, and allows you to setup the one-to-one
mapping of multiple global IP address and local IP address.
• Global IP: Enter the global IP address assigned by your ISP.
• Local IP: Enter the local IP address of your LAN PC corresponding to the global IP address.
• Enable: Check this item to enable the Virtual Computer feature.