Leviton OmniPro II - Set-Up Areas: Thermostats; Setup Areas: Messages

Page 49
SET-UP AREAS: THERMOSTATS
To assign thermostats to specific areas, from the Set-up Areas menu, press the 5 (TEMP) key.
Thermostats can be set up so that they can only be controlled from a specific area or from all areas. PESMs and Temperature
Sensors can only be controlled from a single area, as specified in SETUP AREAS.
THERMOSTAT 1 AREAS:
1 2 3 4 5 6 7 8 0=CLR
↓
THROUGH
THERMOSTAT 64 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↑
SETUP AREAS: MESSAGES
To assign messages to specific areas, from the Setup Areas menu, press the 8 (MSG) key.
Messages can be setup so that they can be displayed in a specific area or in all areas.
MESSAGES 1-8 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↓
MESSAGES 9-16 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↕
MESSAGES 17-24 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↕
MESSAGES 25-32 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↕
MESSAGES 33-40 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↕
MESSAGES 41-48 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↕
MESSAGES 49-56 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↕
MESSAGES 57-64 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↕
MESSAGES 65-72 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↕
MESSAGES 73-80 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↕
MESSAGES 81-88 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↕
MESSAGES 89-96 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↕
MESSAGES 97-104 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↕
MESSAGES 105-112 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↕
MESSAGES 113-120 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↕
MESSAGES 121-128 AREAS:
1 2 3 4 5 6 7 8 0=CLR ↑
WEB VERSION