14
ENFRDECZSKFREEFREE PL
8.5. STARTING THE SYSTEM ON THE TCU
8.5
8.6
Fig. 8.5 TCU 1
To start the system, press and hold the POWER button located on the TCU top tube LED
display unit until the horizontal LEDs glow blue.
To turn the battery (and support) off again, press and hold the POWER button until the
LEDs turn off.
Fig. 8.6 TCU 2
To start the system, press and hold the POWER button located on the TCU 2 top tube
display unit, until the display turns on.
To power off the system, press the POWER button and the display turns off.
If the system does not power on after a long period on non-use, remove the
TCU2 from the top tube and charge the TCU 2 via a USB-C cable.
8.6. SUPPORT MODES
The Levo motor offers 6 Assist Modes, TURBO, TRAIL, ECO, OFF, SMART CONTROL, and
MICRO TUNE mode.
STANDARD BIKE ASSIST MODES:
TURBO MODE: Maximum power mode for high speed sections and climbing.
TRAIL MODE: Maximum control, with sufficient power on demand.
ECO MODE: Most efficient mode for maximum range while offering good power.
OFF MODE: The motor will not offer any assistance, but the display and lights will still function.
SMART CONTROL MODE: The motor, while pedaling, adjusts the power output based on
the ride parameters determined in the Mission Control App.
TURBO TRAIL ECO OFF SMART WA LK
8.7
Fig. 8.7 (TCU 2 ONLY)
When changing support modes the color on the display will change based on the support
mode selected for quick reference.
INFO: The SMART CONTROL indicator light will only be visible on the TCU
when the bicycle is connected to the Mission Control App and is in SMART
CONTROL mode.
To Next Page
Loading...
Need help?
General
