Levoit EverestAir LAP-EL551S-AUS - Advanced Controls & Indicators; Fan Speed, Vent Angle, and Timer; Wi-Fi Indicator & Light Sensor

7
Fan Speed Button
• Cycles through fan speeds:
low (1 indicator will light up),
medium (2 indicators), and
high (3 indicators).
• Tapping the Fan Speed
Button while the air purifier
is in Auto Mode, Turbo
Mode, or Sleep Mode (if the
display is on) will exit that
mode.
Wi-Fi® Indicator
• Turns on, o, or blinks to
indicate pairing status.
See the VeSync in-app
instructions for more
information.
Vent Angle Button
• Cycles through vent angles:
45º, 60º, 75º, and 90º (see
page 12).
Light Sensor
• This sensor detects the
amount of light in the room
to automatically adjust air
purifier settings (see Light
Detection, page 14).
• Light Detection can be
turned on/o in the VeSync
app (see page 14).
CONTROLS & DISPLAY (CONT.)
Timer Button
• Cycles through timer
options from 1–12 hours
(see page 12).
• Press and hold for 2
seconds to begin cycling
through the timer options in
1-hour increments.