12
USING YOUR SMART HUMIDIFIER
1. Plug in the humidifier. Press to turn
your humidifier on.
2. Tap repeatedly to cycle through mist
settings: Auto Mode, Low, Medium, and
High. [
Figure 3.1
]
3. Rotate the nozzle to adjust the direction
of the mist. [
Figure 3.2
]
4. Optionally, use the controls to activate
Sleep Mode, turn the night light on/o,
and more (see Controls, page 7).
5. When your room has reached your
preferred humidity level, turn the
humidifier to a lower setting, or turn it
o. A healthy humidity level is between
40% and 50%. [
Figure 3.3
]
6. Press to turn your humidifier o.
Figure 3.1
Figure 3.2
Figure 3.3
Note:
If there is no water in the tank or the tank is
removed, the humidifier will stop misting,
will
flash 10 times, and the humidifier will turn o. Refill
the tank and properly place it on the base to use
your humidifier.
Note:
Using the VeSync app allows you to control
your smart humidifier remotely and access additional
functions and features (see page 13).
Note:
You can also use Auto Mode to keep the
humidity level between 40% and 50%.
Note:
If there is no water in the tank,
will flash
10 times, and the humidifier will turn o. Fill the
water tank (see Getting Started, page 8).
Note:
• The humidifier will not mist in Auto Mode if the
humidity level is above 50%. If you want the
humidifier to keep misting, change the mist
setting, or change the Auto Mode settings in
the VeSync app.
• For more information about Auto Mode, see
page 13.
To Next Page
Loading...
Need help?
General
