EasyManuals Logo
Home>Levoit>Humidifier>LUH-A601S-WUSB

Levoit LUH-A601S-WUSB User Manual

Levoit LUH-A601S-WUSB
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
23
If your problem is not listed, please contact Customer Support (see page 27).
TROUBLESHOOTING (CONT.)
Problem Possible Solution
Humidifier makes a loud or
unusual noise.
Make sure the water tank is properly in place (see Getting Started, page 8).
Set mist level to a lower setting.
Empty the base chamber. Refill the water tank (not the base chamber)
and place the water tank properly onto the base.
The humidifier may be malfunctioning. Stop using the humidifier and
contact Customer Support (see page 27).
White dust appears around
the humidifier.
We recommend using purified or distilled water to fill the humidifier.
Avoid using water with high mineral content.
Clean the humidifier (see Care & Maintenance, page 16).
Water leaks from the
humidifier.
Make sure the silicone sealing ring around the water outlet valve is secure.
Avoid running the humidifier in a room with over 60% relative humidity.
Wipe any excess water o the top and bottom of the base.
Do not shake the humidifier.
Make sure to place the humidifier on a flat, level surface.
Check the water tank for leaks. If there are leaks, contact Customer
Support (see page 27).
Condensation forms around
humidifier or windows.
Humidity may be too high. Turn down the mist level, turn o the
humidifier, or open a door or window to the room.
Mold grows inside the
humidifier.
Clean the water tank and base chamber regularly
(see Care & Maintenance, page 16).
is red.
Fill the water tank.
Place the water tank properly on the base.
Essential oil has little or no
smell.
Add more essential oil. For best results, use pure essential oil.
Display shows an incorrect
humidity percentage.
The room may be larger than the humidifier’s eective range. Move to a
room smaller than 215–505 ft² / 20–47 m².
Moisture may have built up inside the humidity sensor. Turn o the humidifier
and allow the sensor to air dry. Make sure the nozzle is facing away from the
sensor so that mist does not settle on the sensor (see diagram in
Getting To Know Your Smart Humidifier, page 5).
Display shows Error Code
E1”.
The humidifier is malfunctioning. Contact Customer Support (see page 27).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Levoit LUH-A601S-WUSB and is the answer not in the manual?

Levoit LUH-A601S-WUSB Specifications

General IconGeneral
BrandLevoit
ModelLUH-A601S-WUSB
CategoryHumidifier
LanguageEnglish

Related product manuals