Filling & Refilling
1. Remove the water tank cover by
holding the nozzle and pulling upward.
Figure 1.6
Figure 1.6
Figure 1.7
2. Fill the tank with room-temperature water.
Figure 1.7 Do not fill with hot water.
Note:
• We recommend using purified or distilled
water to fill the tank.
•
Do not
fill past the tank’s max water line.
Figure 1.8
Figure 1.9
• Do not add water directly into
the base chamber. Figure 1.8
CAUTION
Note:
Make sure the water tank is clean
before filling.
• Do not add water through the
mist tube. Figure 1.9
EN
10
To Next Page
Loading...
