Levoit LV600HH Manual

10
Cleaning &
Maintenance
Make sure the humidifier is disconnected
from any power source before cleaning.
Cleaning the Humidifier
1. Unplug the humidifier. Allow the device
and any remaining water to completely
cool before cleaning.
2. Remove the water tank from the base
and pour out any excess water. Pour out
any remaining water from the water tank.
3. Remove the air flume and mist tube.
Detach the mist tube from the air flume
by twisting the tube counterclockwise.
(see figure.cm1) Allow both parts to soak
in vinegar for 30 minutes.
4. Remove the green absorption pad inside
the heating element and rinse under clean
water. Dry the pad with a clean, dry cloth.
5. Add 1 cup of distilled white vinegar to
the inner chamber. Make sure there is
vinegar on each section of the chamber
including the atomization chip and
heating element. Allow the vinegar to
soak for 30 minutes. After 30 minutes,
scrub all parts of the inner chamber with
the included cleaning brush to remove
any mineral buildup.
The Low Water Level Indicator
will appear on the display
when more water needs to be
added to the water tank. When
this happens, the humidifier
been added.
figure.cm1

Levoit LV600HH Specifications

General

Operating time	36 h
Humidity sensor	Yes
Water tank capacity	6 L
Evaporation technology	Ultrasonic
Humidification capacity	500 ml/h
Air purification capability	-
Suitable for room area up to	70 m²
Suitable for room volume up to	- m³
Battery voltage	3 V
AC input voltage	120 V
Power supply type	AC
AC input frequency	60 Hz
Product color	Black, White

Weight and Dimensions

Depth	287 mm
Width	178 mm
Height	267 mm
Weight	2950 g