10
1. Unplug the air purifier and remove the filter cover. [Figure 5.1]
Replacing the Air Filter
2. Remove the old air filter and properly dispose of it. [Figure
5.2]
3. (Optional) Clean any remaining dust and dirt from inside of
the housing using a vacuum hose. [Figure 5.3]
4. Unwrap the new air filter and place it into the housing. Make
sure the filter handles are facing out. [Figure 5.4]
Figure 5.1
Figure 5.2
Figure 5.4
Figure 5.3
unplug
air purifier
handles
facing out
5. Replace the back cover onto the housing. [Figure 5.5]
6. Plug in and turn on the air purifier. Then press and hold for
3 seconds (see Resetting the Air Purifier, page 11).
NOTE:
• Do not clean the filter with water or other liquid.
• The back cover must be placed back on the unit in order for it to power on.
Figure 5.5
To Next Page
Loading...
