7
About the Safety Trigger
When replacing the filter cover onto the air purifier, always make
sure the magnetic safety trigger is properly aligned with its
respective area. [Figure 2.1]
Figure 2.1
OPERATION
General Operation
1. Place the air purifier on a level surface. [Figure 3.1]
2. Plug the air purifier into a powered electrical outlet.
3. Tap to turn on the air purifier. It will start operating at
medium speed.
4. (Optional) Tap to adjust the fan speed of the air purifier.
There are 3 fan speeds to choose from (see Button Controls &
Functions, page 8).
5. Tap to turn o the air purifier when you are finished using it.
Figure 3.1
Figure 3.2
NOTE: Always allow at least 15 inches (38 cm) of clearance on all sides of
the purifier. [Figure 3.2]
safety trigger
makes contact with
the base
38 cm
NOTE: If the trigger is not properly aligned, the air
purifier will not turn on.
To Next Page
Loading...
