Levoit Tower Pro LV-H134 - Button Controls and Functions; Control Panel Button Functions

8
Button Controls & Functions
Power Button
Fan Speed Button
Tap to cycle through the adjustable fan speeds
of the air purifier: low, medium, and high (see Chart
A below).
Fan Speed Indicator Fan Speed
Low
Medium
High
NOTE:
• The fan speed cannot be adjusted while on Auto or Sleep Modes.
•
while the air purifier is operating.
• For best results, it is recommended to run the air purifier at maximum
speed for 15-20 minutes before using a lower speed setting or setting
the purifier to Auto Mode.
Chart A
Auto Mode Button
Tap to activate Auto (automatic) Mode on the air
purifier. This mode automatically adjusts the fan speed
of the air purifier according to the current air quality.
The air quality indicator around the LED display will also
illuminate a certain color based on the air quality (see
Chart B below).
Sleep Mode Button
Tap
to activate Sleep Mode on the air purifier. This
function sets the air purifier to its lowest speed setting
to create a quiet environment while producing air.
Display Button
operating.
NOTE:
•
(except for ) to turn on the display.
Indicator Color Air Quality Fan Speed
Blue Very Good Sleep Mode
Green Good Low Speed
Orange Moderate Medium Speed
Red Bad High Speed
Chart B
Timer Button
Allows you to program a timer from 1 to 12 hours.
1. Tap repeatedly to choose a time.
2. Once you have reached the desired time, the
timer display will flash 5 times before setting.
the timer has finished counting down.
4. To cancel the timer, tap repeatedly until
the timer display reads “- - - -”. Wait until “- - - -”
flashes 5 times to exit out of the timer function.
NOTE:
• To quickly select a time, press and hold
for 2
seconds, or until the desired time appears on the
timer display.
• The timer function will remember your previously
programmed time when you press
.
• The timer function is available for all modes.