EN
7
CONTROLS & DISPLAY
Auto Mode Button
• Turns Auto Mode on (see
page 11).
•
• Press and hold for
5 seconds to connect
VeSync app. See the in-
app instructions for more
information (see page 10).
• Press and hold for
15 seconds to reset the air
Wi-Fi® (see page 10).
Wi-Fi Indicator
• Blinks when connecting
to the VeSync app, lights
up when connected to
disconnected from
VeSync. See the VeSync
in-app instructions for more
information (see page 10).
Sleep Mode Button
• Turns Sleep Mode on (see
page 11).
• Press and hold for
3 seconds to reset the
Check Filter Indicator.
Check Filter Indicator
• Lights up red when the
(see Check Filter Indicator,
page 18).
• To reset the Check Filter
Indicator, press and hold
for 3 seconds. The Check
Fan Speed Button & Indicators
• Cycles through fan speeds:
low (1 indicator will light up),
medium (2 indicators), high
(3 indicators), and turbo
(4 indicators).
• Tapping while the air
Sleep Mode, or Pet Mode
(when the display is lit up)
will exit that mode.
Air Quality Indicator
• These indicator rings use
an automatic infrared dust
sensor to display the air
quality: Blue (Very Good),
Green (Good), Orange
(Moderate), Red (Bad).
Timer Button & Indicators
• Cycles through timer
options: 2 hours, 4 hours,
and 8 hours (see page 12).
Note: You can also use the VeSync app to control these functions, as well as additional app-only features
(see page “VeSync App Functions” on page 14).
Note: The timer indicators
will light up with the
corresponding timer selected.
• lights up when the timer
function is used through the
VeSync app.
To Next Page
Loading...
