Levoit Vital 200S - Troubleshooting; Power and Airflow Issues; Noise and Air Quality Problems

EN
22
 
Air purier will not turn on or
respond to button controls.

Check to see if the power cord is damaged. If it is, stop using
Customer Support (see page 25).

Customer
Support (see page 25).
Airow is signicantly
reduced.

properly in place (see page 8).
Tap to increase the fan speed.
Leave 38 cm / 15 inches of clearance from the front of the air


19).
20).
Air purier makes an unusual
noise while the fan is on.

removed (see page 8).

surface.
20).


Support (see page 25). 
Poor air purication quality.
Tap to increase the fan speed.
Make sure no objects are blocking the front, sides, or top of


properly in place (see page 8).


take longer.
20).
TROUBLESHOOTING