EN
11
Sleep Mode operates quietly by using a fan
speed lower than low speed.
Tap to turn Sleep Mode on.
6 seconds if no other buttons are tapped.
To switch from Sleep Mode, tap Auto
Mode, Pet Mode, or select a fan speed
VeSync app.
Note:
• When the display is turned o, tap
any button to turn the display back
on. If you don’t tap another button,
the display will turn o again after
6seconds.
• will still turn on and stay on
if it’s time to check your lter
(seepage18)
Auto Mode
Sleep Mode
USING YOUR SMART
AIR PURIFIER
Plug in and tap to turn on the air
Tap to change fan speed between
low, medium, high, and turbo.
Note:
• The fan speed indicators are not
buttons and only display the fan speed
setting.
• The fan speed indicators will light up
when active, 1 indicator will light up for
low, 2 for medium, 3 for high, and 4 for
turbo.
• Turbo fan speed (4 indicator lights) is
the loudest, but cleans air the quickest.
• For best results, or to address a specic
air quality issue such as smoke, run the
air purier on turbo for 15–20 minutes
before using a lower speed.
• To eectively clean air, keep windows
and doors closed while the air purier
is on.
Note: Using the VeSync app allows you to control
your air purier remotely and access additional
functions and features (see page 14).
Auto Mode uses AirSight™, an infrared dust
speed automatically based on air quality. For
example, if the air quality is bad, the fan will
automatically be set to high speed.
Tap to turn Auto Mode on.
will light up while Auto Mode is on.
To switch from Auto Mode, tap Sleep
Mode, Pet Mode, or select a fan speed
VeSync app.
Air Quality Indicator Chart
Indicator
Colour
Air
Quality
Auto Mode
Fan Speed
Blue Very Good Sleep Mode
Green Good Low
Orange Moderate Medium
Red Bad High
Note:
• Auto Mode does not use the turbo fan
speed.
• The VeSync app also supports Ecient
Auto Mode and Quiet Auto Mode (see
page 15).
To Next Page
Loading...
