EN
12
Display Off
Light Detection
Timer
lights (except the Check Filter Indicator).
VeSync app. When this mode is turned on, the
settings based on the amount of light in the
room.
You can manually set the timer for 2, 4, or
button. You can also set
the timer for 1–24 hours through the VeSync
app.
•
Auto Mode or Pet Mode, it will not use the
high or turbo fan speeds, even if the air
quality is poor, to avoid making too much
noise.
• When the room becomes light again, the air
The display will automatically turn back on,
and Auto Mode will no longer be limited.
Tap repeatedly to select a time.
Tap
Tap any button to temporarily turn the
display back on. If you don’t tap another
6 seconds.
Tap to turn the display back on.
Note: You can set a timer for 1–24 hours in the
VeSync app.
Note: The Check Filter Indicator will still turn
on and stay on if it’s time to check your lter
(seepage 15).
Note:
• The indicators are not buttons and
cannot be used to select a time.
• The timer indicators will light up blue
when active.
• When the timer is set through the
VeSync app, the indicator will light
up instead. Once the timer has nished,
the air purier will turn o.
Note:
• You can change the fan speed at any
time while the timer is on.
• The timer will restart if the time is
changed.
To cancel the timer, tap until all timer
To Next Page
Loading...
