Levoit Vital 200S - Display Lock and Standby Mode; Memory Functionality

EN
13
Memory Function
Standby Mode
Display Lock

unplugged, it will remember its previous fan
speed, Sleep Mode, Auto Mode, Pet Mode,
and in-app Display and Light Detection
settings.



the display to prevent settings from being
accidentally changed. Buttons will not respond
to being tapped.
 Press and hold for 3 seconds to lock
the display. The Display Lock Indicator
will light up above the button.
Note: The air purier will not remember timers.
Note: If the display is turned o, the Display Lock
Indicator will ash 3 times to show that the display
has been locked, then turn o.
Note:
• In Standby Mode, the infrared dust
sensor will still detect the surrounding
air quality and give you updates in the
VeSync app.
• Display Lock (available in the VeSync
app) can be used while the air purier
is in Standby Mode to keep the air
purier from being turned back on.

 The Display Lock Indicator will blink when
any other button is tapped to indicate
that Display Lock is on.
 Press and hold again for 3 seconds
to unlock the display. The Display Lock
