MPX G2 Service Manual
4-32
4. Set the Input Level Pot to the 12:00 position.
5. Adjust the Output Level Pot over its entire range, and verify that no pops, clicks, or scratchiness is heard
when turning the pot.
6. Set the Output Level Pot back to a comfortable listening level.
7. With the Guitar play a few notes and listen to how they are processed through the unit
8. Listen for any pops, clicks, or distortion in the audio.
9. Set the Output Level Pot fully CCW.
Shock Test
1. Lift one corner of the MPX G2 four inches off the work surface and drop.
2. Verify that no audio or display intermittence is caused by this action.
3. Repeat for each of the remaining three corners of the unit.
Note: Keep one corner of the unit touching the work surface at all times to prevent damage to the unit.
To Next Page
Loading...
Need help?
General
