Lexicon PCM 80 V1.10 - Appendix E: System (Type 0) Parameters

40
Lexicon
PCM 80 Version 1.10 MIDI Implementation Details
Appendix E: System (Type 0) Parameters
These parameters are global (not part of a preset). The automation column indicates transmission via
SysEx automation.
Param# Max Auto-
Dec Hex Description Value mation? Notes
0 00 Audio source 2 n 0=Digital; 1=Analog 48kHz; 2=Analog 44.1kHz
1 01 Analog Input Level 100 ? Percentage, from 0-100
2 02 Digital Input Level 100 ? Percentage, from 0-100
3 03 MIDI Receive 17 n 0=Off; 1-16=MIDI channels; 17=Omni
4 04 MIDI transmit
on/off/channel 16 n 0=Off; 1-16=Channel for transmission of controller data
5 05 External tap
source patch
source
list y
6 06 External tap
threshold 127 y
7 07 MIDI controller ID
for continuous
pedal 117 y
8 08 MIDI controller ID
for footswitch 1 117 y
9 09 MIDI controller ID
for Adjust knob 117 n
10 0A MIDI SysEx device ID 126 n This parameter is not controllable from MIDI, but is re-
turned by a request for the parameter value.
11 0B MIDI SysEx enable 1 n This parameter is not controllable from MIDI, but is re-
turned by a request for the parameter value.
12 0C Memory protect 1 n 0=Off; 1=On
13 0D Pro/Go Mode 1 y 0=Go; 1=Pro
14 0E Mix Pgm/Global 1 y 0=Program; 1=Global
15 0F Tempo Pgm/Global 1 y 0=Program; 1=Global
16 10 Autoload 1 y 0=Off; 1=On
17 11 Bypass Mode 3 y 0=All Mute; 1=Input Mute;
2=Output Mute; 3=Bypass
18 12 MIDI controller ID
for Footswitch 2 117 y
19 13 Patch update mode 1 y 0=Immediate; 1=Delayed
20 14 MIDI Program
Change mode 3 n 0=On; 1=Off; 2=Mapped; 3=Chained
21 15 Map select 127 y Actual number of valid maps depends on presence and
type of card. The parameter specific message for this
parameter will always return the maximum possible
range. The actual useful values should be determined
from the Configuration Response message.
22 16 Chain select 127 y Actual number of valid chains depends on presence and
type of card. The parameter specific message for this
parameter will always return the maximum possible
range. The actual useful values should be determined
from the Configuration Response message.
23 17 Pgm+ source 120 y 0=No Assignment; 1-118=MIDI controllers; 119=Foot Sw
1;120=Foot Sw 2.
24 18 Pgm- source 120 y 0=No Assignment; 1-118=MIDI controllers; 119=Foot Sw
1;120=Foot Sw 2.
25 19 Program Change
bypass mode 1 y 0=Mute; 1=Bypass