4
LexiconPCM 80 Version 1.10 MIDI Implementation Details
System Exclusive Message Descriptions
System Exclusive Message Header Block
All SysEx messages are preceded by the standard header.
Byte # Byte Value Description Notes
1 F0 SysEx ID
2 06 Lexicon ID
3 07 PCM 80 ID
4 0iii iiii Device ID Values 0-126 are defined as specific addresses. Any mes-
sage sent to device 127 will be received by any PCM 80 on the
cable as long as it is enabled to receive System Exclusive
messages.
5 0iii iiii SysEx Identifier Identifies the type of message. All System Exclusive mes-
sages in this document are described by this identifier. Iden-
tifiers which are not used should be considered as reserved
and should not be used.
6-(n-1) Message-specific bytes See individual descriptions
n F7 EOX End of exclusive
Table of SysEx Identifiers
The following table provides a quick reference for the System Exclusive messages which are described
in detail in the following pages.
Identifier (Hex) Name of Message
0x00 System Configuration Response
0x01 Bank Dump
0x02 Single Effect Dump
0x03 Table Dump
0x04 Table Element Dump
0x05 Chain Bulk Dump
0x06 Single Chain Dump
0x07 Chain Element Dump
0x08 Display Dump
0x09-0x0A reserved
0x0B Parameter Dump
0x0C Button Dump
0x0D-0x11 reserved
0x12 Soft Row Assignment Dump
0x13 Patch Assignment Dump
0x14 Knob Message
0x15 Program Change Dump
0x16 Parameter Specific Response
0x17 Parameter Display Response
0x18 System Setup Dump
0x19 Save Current Edit Buffer Message
0x1A Effect Info Response
0x1B reserved
0x1C Adjust Knob Name Dump
0x1D reserved
0x1E Verbose Dump Message
0x1F LED Response
0x20 Meter Response
0x21 Patch Display Response
0x22 Matrix Mapping Response
0x23 Adjust Knob Value Dump
0x24 Soft Row Display Response
0x25-0x7B reserved
0x7C Failure Response
0x7D-0x7E reserved
0x7F Data Request
To Next Page
Loading...
