In Windows XP:
a Click Start-* Run.
b Type D:\setup.exe, where D isthe letter of your CD or DVD drive.
Using Macintosh
1 Close all open software applications.
2 From the Finder desktop, double-click the printer folder.
3 Double-click the Uninstaller icon.
4 Follow the instructions on the computer screen to remove the printer software.
5 Restart the computer before reinstalling the printer software.
6 Insert the installation CD, and then follow the instructions on the computer screen to reinstall the software.
Ifthe software stilldoes not install correctly, visit our Web siteat www.lexmark.com to check for the latest software.
1 In all countries or regions except the United States, selectyour country or region.
2 Click the links for drivers or downloads.
3 Selectyour printer family.
4 Selectyour printer model.
5 Select your operating system.
6 Select the file that you want to download, and then follow the directions on the computer screen.
Enabling the USB port in Windows
To confirm that the USB port is enabled on the computer:
1 Do one of the following:
In Windows Vista
a Click _-* Control Panel.
b Click System and Maintenance -* System.
c Click Device Manager.
In Windows XP
a Click Start.
b Click Control Panel -* Performance and Maintenance -* System.
c From the Hardware tab, click Device Manager.
In Windows 2000
a Click Start.
b Click Settings -* Control Panel -* System.
c From the Hardware tab, click Device Manager.
55
To Next Page
Loading...
Need help?
General