Repair information 4-137
5026
Paper pick mechanism assembly removal
See “Paper pick assembly” on page 7-7 for the part number.
1. Remove the paper tray.
2. Remove the waste toner assembly. See “Waste toner assembly removal” on page 4-176.
3. Remove the rear frame cover. See “Rear frame cover removal” on page 4-47.
4. Disconnect the connector in JFDPCK1 (A) and JTRAY1 (B) on the system board.
5. Push the cables through the hole in the frame (C).
6. Open the front access cover.
To Next Page
Loading...
