Lexmark C752 - Page 329

Interfaces
8-20
STROBE Receiver for the Lexmark C752
The following diagram illustrates the STROBE receiver for the Lexmark C752.
AUTOFD* Receiver for the Lexmark E220
The following diagram illustrates the AUTOFD* receiver for the Lexmark E220.
Connector
Pin
33 ohm ±10%
1.5K ohm ±10%
FCT 2827
690 pF ±10%
GND
Pin
+5V, 5%
or
FCT 2828
FCT 2827
620 pF ±10%
+5V, 5%
GND
Connector
Pin
56 ohm ±5%
1.1K ohm ±10%
FCT 2828
or