Lexmark C752 - Page 330

Interfaces
8-21
AUTOFD* Receiver for the Lexmark C752
The following diagram illustrates the AUTOFD* receiver for the Lexmark C752.
DATA 1-8 Signal Driver/Receivers for the Lexmark E220 and C752
The following diagram illustrates each of the DATA 1-8 signal driver/receivers for the
Lexmark E220 and C752.
FCT 2827
690 pF ±10%
+5V, 5%
GND
Connector
Pin
39 ohm ±5%
1.5K ohm ±10%
FCT 2828
or
FCT 2245
150 pF ±20%
+5V, 5%
GND
Connector
Pin
33 ohm ±5%
2.2K ohm ±10%