Loading the trays
31
Printing
• Flex the print media back and forth to loosen the sheets, and then fan them. Do not fold or crease the print media.
Straighten the edges of the stack on a level surface.
Warning: Never remove paper trays while a print job is printing. It could damage the tray or the printer.
Loading 500-sheet trays
To load any of the 500-sheet trays:
1 Remove the tray and place it on a flat, level surface.
2 Squeeze the front guide lever and slide the guide to the front of the tray.
3 Squeeze the side guide lever and slide the guide to the correct position for the size paper you are loading.
Icons along the back of the tray indicate paper sizes.
4 Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges of the stack on a level surface.
To Next Page
Loading...
