Lexmark C770 - Page 70

Clearing fuser jams
70
Clearing paper jams
3 Pull down the latches. They slide toward the center to release the fuser.
4 Pull the fuser out, and set it on a clean, flat surface.
5 Unsnap the housing and set it aside.
6 Lift up the fuser roller cover and remove the jam.
7 Close the fuser roller cover.
8 Snap the housing back onto the fuser.
9 Insert the fuser back into the printer.
10 Slide the latches out, and then pull up to refasten them.
11 Close the doors.