27
Install memory and option cards
Installing a
memory card
Complete the following instructions to
install either a printer memory card or a
flash memory card. Memory cards must
have 168-pin connectors.
Note: Memory options designed for
other Lexmark printers may not work
with your printer.
The system board has three connectors
for optional memory cards. You can
install any combination of printer
memory and flash memory cards in the
connectors. However, the printer only
recognizes one flash memory card at a
time.
Warning! Printer memory and flash
memory cards are easily damaged by
static electricity. Touch something metal
such as the printer frame before you
touch a memory card.
1 Remove the system board access
cover (see page 24).
2 Push open the latches on both
ends of the memory connector
you want to use.
3 Unpack the memory card.
Avoid touching the connection
points along the edge of the card.
Save the packaging.
To Next Page
Loading...
