35
Attach cables
Step 5: Attach cables
The Lexmark C910 can be attached to a network or locally (directly to
a computer).
Network printing You can attach your printer to a network using standard network
cables.
A 10BaseT/100BaseTX Fast Ethernet port is standard on the
Lexmark C910n and Lexmark ABCdn. You can add a Token-Ring or
10Base2 Ethernet port to any printer model by installing an optional
MarkNet internal print server.
To attach the printer to a network:
1 Make sure the printer is turned off and unplugged.
2 Connect the printer to a LAN drop or hub using standard
cabling that is compatible with your network:
— Token-Ring, Ethernet 10BaseT, or Ethernet 100BaseTX
networks (Category 5) use an RJ-45 connector
To Next Page
Loading...
