31
Install memory and option cards
3 Flip the hard disk over, and then
press the three posts on the
mounting plate into the holes on
the system board. The hard disk
snaps into place.
Installing an
option card
Your printer has one expansion card slot
that supports a number of option cards.
The following table describes their
function.
Card Function
MarkNet™ internal print server Adds an Ethernet or Token-Ring port to connect your printer to a network.
Install a MarkNet N2501e or N2401e internal print server if you received either
of these cards as part of a multifunction printer upgrade.
USB/Parallel 1284-C Interface Card Adds a Universal Serial Bus (USB) port or a parallel port.
Coax/Twinax Adapter for SCS Adds a coaxial/twinaxial port.
Tri-Port Adapter Adds LocalTalk, serial, and infrared ports. For details on setting up and using
the Tri-Port Adapter, refer to the documentation that shipped with the card.
Infrared Adapter Adds infrared functionality.
To Next Page
Loading...
