32
Install memory and option cards
Note: The Lexmark C910n and
Lexmark ABCdn printers ship with an
Ethernet print server already installed.
You need a small Phillips screwdriver to
install these options.
1 Remove the system board access
cover (see page 24).
2 Remove the screw from the metal
plate that covers the connector
slot, and then lift the plate off.
Save the screw.
Warning! Option cards are easily
damaged by static electricity. Touch
something metal such as the printer
frame before you touch an option card.
3 Unpack the option card.
Save the packing materials.
To Next Page
Loading...
