42
Install printer supplies
3 Remove one of the
photodevelopers from its packing
material.
You can install the
photodevelopers in any order.
However, it may be easier to
install them from left to right:
black, yellow, cyan, and magenta.
4 Remove the tape from the
photodeveloper.
The photodeveloper has a cover
over the green glass tube. Do not
touch the glass. Touching the
glass may damage it and reduce
print quality. Do not remove the
cover until you begin installing the
photodeveloper.
5 Align the photodeveloper with the
slot in the printer as shown.
To Next Page
Loading...
