Lexmark C910 Reference Guide

PJL
3-10
• LRESOURCE:"device:filename.filetype" is required for LRESOURCE vari-
ables. (See Table 3-9 “Printer Unique LRESOURCE Variables” on
page 3-53.)
Values for "
device:filename.filetype" are:
device flash, flash1, disk, or disk1 (case insensitive)
filename A unique identifier for a file, such as the macro ID for a PCL
macro, the symbol set ID for a PCL symbol set, the font ID
for a PCL font, and so on. The
filename is case sensitive.
filetype An identifier that categorizes the file, such as p5macro for
PCL macros or
p5symset for PCL symbol sets. See the
table beginning on page 3-87 for a complete list of the
supported file types. The
filetype is case sensitive.
variable=value
The supported variables and values are listed in the tables beginning on
page 3-12.
Note: Variables may be modified by the DEFAULT command, except those marked
Read Only. Some variables may only be modified using the PJL SET
command. These variables cannot be modified using the DEFAULT
command. They are marked Set Only.

Lexmark C910 Specifications

General

Brand	Lexmark
Model	C910
Category	Printer
Language	English