Lexmark C910 - File Commands for Flash or Disk

PJL
3-86
LDOWNLOADTARGET Command
This command specifies which device is the target for downloaded files. The target
can be RAM, flash, or disk.
Syntax:
@PJL SET LDOWNLOADTARGET=variable [<CR>]<LF>
File Commands for Flash or Disk
Use the following commands to manage resources on flash and disk devices:
• LOPENFILE
• LCLOSEFILE
• LREADFILE
• LWRITEFILE
• LRUNFILE
• LRENAMEFILE
• LDELETEFILE
• LFORMAT
• LDEFRAG
Syntax:
@PJL LOPENFILE DEVICE=filedevice FILENAME=fname ACCESS=accesstype
[<CR>]<LF>
See Chapter 6: Flash Memory and Disk for more information.