Lexmark C910 - Altitude Specifications; Atmospheric Pressure; Power on to Ready State Time Period

Specifications
7-9
Altitude Specifications
Atmospheric Pressure
74.6 to 101.3 kPa (560 to 760 mmHg)
Power On to Ready State Time Period
After you turn the printer on, it performs certain internal diagnostics and prepares for
printing. The following table lists the approximate time it takes for your printer to
perform the internal diagnostics and enter the
Ready state. Once the printer enters the
Ready state, it is prepared to print.
Table 7-14: Printer Altitude Specifications
Printer Model Altitude (Above Sea Level)
C720 0 – 2500 m (8,200 ft)
C750 0 – 3048 m (10,000 ft)
C910 0 – 3048 m (10,000 ft)
E320 0 – 2500 m (8,200 ft)
E322 0 – 2500 m (8,200 ft)
J110 0 – 3000 m (9,750 ft)
T420 0 – 2500 m (8,200 ft)
T520 0 – 3048 m (10,000 ft)
T522 0 – 3048 m (10,000 ft)
T620 0 – 3048 m (10,000 ft)
T622 0 – 3048 m (10,000 ft)
W812 0 – 2500 m (8,200 ft)
W820 0 – 2500 m (8,200 ft)
Table 7-15: Power On to Ready State Time Period
Printer Model Time to Ready (Time in Seconds)
C720 240
C750 <180
C910 200
E320, E322 <40