Lexmark C910 - Page 129

PJL
3-31
LENVELOPEWEIGHT
(DEFAULT only)
Envelope
Weight
LIGHT, NORMAL, HEAVY NORMAL
LESCCHAR
(READ only)
(Port specific)
ESC
Character
Substitution
0 to 255 27
LFAXRESOLUTION
(SET only)
Fax Resolution STANDARD, FINE, SUPERFINE, ULTRAFINE
Note: Status Readback commands return a ? when
no SET command has modified the
LFAXRESOLUTION variable. For more information,
see “Status Readback Commands” on page 3-54.
STANDARD
LFAXREDIAL
(SET only)
Fax Redial 0 to 14
Note: Status Readback commands return a ? when
no SET command has modified the LFAXREDIAL
variable. For more information, see “Status Readback
Commands” on page 3-54.
5
LFAXREDIALFREQUENCY
(SET only)
Fax Redial
Frequency
1 to 200
Note: Status Readback commands return a ? when
no SET command has modified the
LFAXREDIALFREQUENCY variable. For more
information, see “Status Readback Commands” on
page 3-54.
3
LFAXTRANSMISSIONLOG
(SET only)
Fax
Transmission
Log
PRINT, DONOTPRINT, PRINTERROR
Note: Status Readback commands return a ? when
no SET command has modified the
LFAXTRANSMISSIONLOG variable. For more
information, see “Status Readback Commands” on
page 3-54.
PRINTERROR
LFEEDERPAPERTYPE Envelope
Feeder Paper
Type
ENVELOPE, CUSTOMTYPE1, CUSTOMTYPE2,
CUSTOMTYPE3, CUSTOMTYPE4, CUSTOMTYPE5,
CUSTOMTYPE6, “name”
name is a variable that allows for custom naming of
print material types. The text string is truncated to 24
characters.
ENVELOPE
LGLOSSYLOADING Glossy Paper
Loading
OFF, DUPLEX OFF
Table 3-4: Printer Unique Variables for Both Printer Languages (Continued)
Variable Function Selections Factory Default