Lexmark C910 - Page 167

PJL
3-69
Intervention required:
close door <d>
2
40021 Close Door <d> FALSE
Intervention required:
close cover <c>
3
40021 Close Cover <c> FALSE
Intervention required:
print cartridge missing
40021
Insert Print Cartridge FALSE
Intervention required:
paper jam
40022
2xx Paper Jam FALSE
Intervention required:
check tray connection
40027 Check Tray <source #> Connection FALSE
Intervention required:
install tray x or cancel job
40027
Install Tray x or Cancel Job FALSE
Intervention required:
envelope feeder detached
40028
Reattach Envelope Feeder FALSE
Intervention required:
multipurpose feeder detached
40028 Reattach MP Feeder FALSE
Intervention required:
install envelope feeder or
cancel job
40028
Install Env Feed or Cancel Job FALSE
Intervention required:
reattach output bin
40029
Reattach Output Bin <bin #> FALSE
Intervention required:
reattach bins
40029
Reattach Bins <bin #x - bin #y> FALSE
Intervention required:
install bin x or cancel job
40029 Install Bin x or Cancel Job FALSE
Intervention required:
check finisher installation
40029
Check Finisher Installation FALSE
Intervention required:
check mailbox installation
40029
Check Mailbox Installation FALSE
Intervention required:
too many trays attached
40030
58 Too Many Trays Attached FALSE
Intervention required:
too many bins attached
40030
58 Too Many Bins Attached FALSE
Intervention required:
too many disks installed
40030
58 Too Many Disks Installed FALSE
Table 3-14: PJL Message for Attendance Conditions
Printer State Status Code Display String Online Status
1
XXXX represents a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow and Black cartridges,
respectively. For this message, the values for XXXX are returned to indicate which ink cartridges are defective.
2
<d> represents a one-letter designator for each door labeled on the printer.
3
<c> represents a one-letter designator for each cover labeled on the printer.
Note: The Display String is returned in the current language. A display string that is returned is truncated to the DISPLAY
CHARACTER SIZE returned in INFO CONFIG.