PostScript
4-108
PageCount integer (Read-only) Page Count
TimeToStandby integer Power Saver. Supported values are:
0 to 120, in minutes
Type name (Read-only) Always returns the value of /Parameters.
Device Parameters for the Parameters Device %Console%
Language name Display Language
Type name (Read-only) Always returns the value of /Parameters.
Device Parameters for the IODevice Device %disk1%
BlockSize integer (Read-only)
Free integer (Read-only) Indicates the amount of free space available (in pages) on the
disk. Valid only if the disk is mounted (mounted is set to True). A value of 0
(zero) indicates that either the disk is not mounted or is full.
HasNames boolean (Read-only) Indicates if the disk supports named files. Valid only if the disk
is mounted (mounted is set to True). If the disk is not mounted, the
parameter has a value of False.
InitializeAction integer Specifies an action for initializing the disk. Supported values are:
0 Indicates no action; the value returned when the parameter is read.
1 Indicates that the current file system (if any) should be deleted and
a new one of LogicalSize created (the disk is assumed to have
been formatted already). The disk must first be mounted;
otherwise, an ioerror results.
2 Reformats the entire disk before creating a new file system of size
LogicalSize.
3 (or greater) has the same effect as the value 2 and also tests the
disk x - 2 times.
Note: The current file system refers to /FileSystem. See Type as follows for
more information.
LogicalSize integer Specifies the size of the file system to be created and is as an argument by
InitializeAction.
• If 0 (zero), InitializeAction uses the size of the entire disk. When queried,
indicates the current size of the file system on the device (in pages). A
value of 0 indicates that the device is not mounted.
• If set with a certain value and the device is reformatted, a query returns
the value that was set. If queried before the disk is reformatted, a
different value from the one set may be returned because it may return
the current size.
• If set to 1, 2, or 3, an ioerror occurs.
Legal value: Any non-negative integer, including 0. The value must be less
than or equal to the value of PhysicalSize. If set to a value greater than
PhysicalSize, or less than zero, a rangecheck error occurs.
Table 4-21: PostScript Emulation Device Parameters (Continued)
Key Type Definition
To Next Page
Loading...
