Lexmark C910 - Page 335

Specifications
7-7
Table 7-10: Clearance Requirement Specifications
Printer Side
Printer Model
T420 T520 T522 T620 T622
Left side
2
304.8 mm (12 in.) 304.8 mm (12 in.) 305 mm (12 in.) 305 mm (12 in.)
Right side 76.2 mm (3 in.) 304.8 mm (12 in.) 304.8 mm (12 in.) 305 mm 12 in.) 305 mm 12 in.)
Front
2
508 mm (20 in.) 508 mm (20 in.) 508 mm (20 in.) 508 mm (20 in.)
Rear
2
304.8 mm (12 in.) 304.8 mm (12 in.) 305 mm (12 in.) 305 mm (12 in.)
Above 2 305 mm (12 in.) 305 mm (12 in.) 305 mm (12 in.)
1
305 mm (12 in.)
1
1
If the Lexmark T620 and T622 models have an optional output device attached or are fully configured printers, then the
clearance required is 1372 mm (54 in.).
2
When installing the printer, leave enough room to access the paper trays, the front doors, the multipurpose feeder, the left
side door, and the rear exit door.
Table 7-11: Clearance Requirement Specifications
Printer Side
Printer Model
W812 W820
Left side 200 mm (7.87 in.) 95.25 mm (3.75 in.)
Right side 200 mm (7.87 in.) 95.25 mm (3.75 in.)
Front 700 mm (27.56 in.) 254 mm (10 in.)
Rear 200 mm (7.87 in.) 254 mm (10 in.)
Above 400 mm (15.75 in.) 228.6 (9 in.)