L
Lynn BlairAug 31, 2025
What to do if Lexmark C925 Printer needs supply to complete job?
- SStephanie ParkAug 31, 2025
If your Lexmark Printer indicates that a supply is needed to complete the job, touch Cancel to clear the message.
To Next PageTo Next Page
What to do if Lexmark C925 Printer needs supply to complete job?
If your Lexmark Printer indicates that a supply is needed to complete the job, touch Cancel to clear the message.
What to do if Lexmark C925 disk is near full?
If your Lexmark Printer's disk is near full, you can touch Continue to clear the message and continue printing. Alternatively, delete fonts, macros, and other data stored on the printer hard disk. As another option, install a hard disk with higher capacity.
What to do if Lexmark C925 Printer waste toner bottle is nearly full?
If your Lexmark Printer's waste toner bottle is nearly full, order a replacement waste toner bottle immediately. You can also replace the waste toner bottle, or touch Continue to clear the message and continue printing.
How to fix corrupted disk on Lexmark Printer?
If your Lexmark Printer's hard disk is corrupted and cannot be repaired, touch Format disk to reformat the printer hard disk and clear the message.
What to do if Lexmark C925 shows error reading USB drive?
If your Lexmark Printer displays an error reading the USB drive, it may be due to an unsupported USB device. Remove the USB device, and then install a supported one.
How to resolve insufficient memory error on Lexmark C925?
If your Lexmark Printer displays an 'Insufficient memory to collate job' error, touch Continue to print the portion of the job already stored and begin collating the rest of the print job. Alternatively, cancel the current print job.
How to fix Lexmark Printer when cartridge is low?
If your Lexmark printer indicates that a color cartridge is low, order a replacement toner cartridge immediately. You can also try these steps: remove the specified cartridge, firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner, reinsert the cartridge, and then touch Continue to clear the message and continue printing. Repeat this procedure multiple times until the print remains faded, and then replace the cartridge.
What to do if Lexmark C925 Printer memory is full?
If your Lexmark Printer displays a 'Memory full' message, you can touch Cancel job to clear the message. Alternatively, install additional printer memory.
How to fix incorrect paper size error on Lexmark Printer?
To resolve the incorrect paper size error on your Lexmark Printer, try the following: Load the appropriate paper or specialty media in the proper tray. Ensure that the wheel on tray 1 is set to the paper size loaded in the tray and that this size matches what you are trying to print. Check the length and width guides of the tray to ensure the paper is properly loaded. Also, verify that the Print Properties or Print dialog settings have the correct paper size and type. Alternatively, touch Continue to clear the message and print using a different tray.
Why is my Lexmark C925 printing blank pages?
If your Lexmark Printer is printing blank pages, ensure that the toner or print cartridge is not low.
General| Security algorithms | 802.1x RADIUS, LEAP, MD5, PEAP, SSL/TLS |
|---|---|
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Network connection type | Ethernet LAN |
| Supported network protocols | TCP/IP IPv4, IPX/SPX, AppleTalk, LexLink (DLC), TCP/IP IPv6, TCP, UDP |
| USB 2.0 ports quantity | - |
| Ethernet LAN (RJ-45) ports | 1 |
| Internal | Yes |
| Product color | Green, Silver |
| Package weight | 1500 g |
