To Next Page

To Previous Page

Loading the multipurpose feeder

1 Push the multipurpose feeder latch to the left.

2 Open the multipurpose feeder.

3 Pull the multipurpose feeder extender.

Note: Guide the extender gently so that the multipurpose feeder

is fully extended and open.

4 Prepare the paper for loading.

• Flex the sheets of paper back and forth to loosen them, and

then fan them. Do not fold or crease the paper. Straighten the

edges on a level surface.

• Hold transparencies by the edges, and then fan them.

Straighten the edges on a level surface.

Note: Avoid touching the printable side of transparencies.

Be careful not to scratch them.

• Flex a stack of envelopes back and forth to loosen them, and

then fan them. Straighten the edges on a level surface.

Warning—Potential Damage: Never use envelopes with

stamps, clasps, snaps, windows, coated linings, or self‑stick

adhesives. These envelopes may severely damage the

printer.

5 Locate the maximum paper fill indicator and tab.

Note: Make sure the paper or specialty media is below the

maximum paper fill indicator located on the paper guides.

1 Width guide tab

2 Maximum paper fill indicator

3 Width guide

4 Feeder extender

5 Paper size indicator

Lexmark CS310 Quick Refence Guide

Other manuals for Lexmark CS310