Lexmark CS317 - Page 130

Insert tray [x]
Insert the indicated tray into the printer.
Load [paper source] with [custom string]
Try one or more of the following:
• Load the indicated tray or feeder with the correct size and type of paper.
• From the printer control panel, press to clear the message and continue printing.
Note: If the printer finds a tray or feeder that has the correct paper type and size, then it feeds from
that tray or feeder. If the printer cannot
find
a tray or feeder that has the correct size and type of
paper, then it prints from the default paper source.
• Cancel the current job.
Load [paper source] with [custom type name]
Try one or more of the following:
• Load the tray or feeder with the correct size and type of paper.
• From the printer control panel, press to clear the message and continue printing.
Note: If the printer finds a tray or feeder that has the correct size and type of paper, then it feeds
from that tray or feeder. If the printer cannot
find
a tray or feeder that has the correct size and type
of paper, then it prints from the default paper source.
• Cancel the current job.
Load [paper source] with [paper size]
Try one or more of the following:
• Load the tray or feeder with the correct size of paper.
• From the printer control panel, press to clear the message and continue printing.
Note: If the printer finds a tray or feeder that has the correct paper size, then it feeds from that tray
or feeder. If the printer cannot
find
a tray or feeder that has the correct size of paper, then it prints
from the default paper source.
• Cancel the current job.
Load [paper source] with [paper type] [paper size]
Try one or more of the following:
• Load the tray or feeder with the correct size and type of paper.
• From the printer control panel, press to clear the message and continue printing.
Note: If the printer
finds
a tray or feeder that has the correct size and type of paper, then it feeds
from that tray or feeder. If the printer cannot
find
a tray or feeder that has the correct size and type
of paper, then it prints from the default paper source.
Troubleshooting 130