Use To
Asset Report Print a report containing asset information including the printer serial
number and model name. The report contains text and UPC bar codes that
can be scanned into an asset database.
Network/Ports
Active NIC menu
Use To
Active NIC
Auto
[list of available network cards]
Allow the printer to connect to a network.
Notes:
• Auto is the factory default setting.
• This menu item appears only if an optional network adapter is installed.
Standard Network or Network [x] menus
Note: Only active ports appear in this menu.
Use To
Energy Ecient Ethernet
Enable
Disable
Set the printer Ethernet connection to a energy‑saving mode.
Note: Enable is the factory default setting.
PCL SmartSwitch
On
O
Set the printer to automatically switch to PCL emulation when a print job
requires it, regardless of the default printer language.
Notes:
• On is the factory default setting.
• When
O
is used, the printer does not examine incoming data. The
printer uses PostScript emulation if PS SmartSwitch is set to On. It uses
the default printer language
specified
in the Setup menu if PS
SmartSwitch is set to O.
PS SmartSwitch
On
O
Set the printer to automatically switch to PS emulation when a print job requires
it, regardless of the default printer language.
Notes:
• On is the factory default setting.
• When O is used, the printer does not examine incoming data. The
printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the
default printer language specified in the Setup menu if PCL SmartSwitch
is set to O.
Understanding the printer menus 61