Lexmark CS317 User Manual

Action Yes No
Step 3
Make sure you are using a recommended type of color
transparency, and then resend the print job.
Does the print on the color transparency look lighter?
The problem is
solved.
Contact
customer
support.
The color of the print does not match the color of the original file
Note: The color conversion tables used in Auto Color Correction mode generally approximate the colors of a
standard computer monitor. However, because of technology
dierences
that exist between printers and
monitors, there are many colors that can also be aected by monitor variations and lighting conditions.
Action Yes No
Step 1
a Set Color Correction to O.
Note: When the printer color correction is disabled, the color
is based on the print job information, and no color conversion
is implemented.
b Resend the print job.
Does the color of the print match the color of the file on the
computer screen?
The problem is
solved.
Go to step 2.
Step 2
From the Quality menu on the printer control panel, do the
following:
a Select Color Correction, and then select Manual.
b Select Manual Color, and then select the appropriate color
conversion table for the
aected
object type.
c Resend the print job.
Does the color of the print match the color of the file on the
computer screen?
The problem is
solved.
Contact
customer
support.
The print appears tinted
Action Yes No
Adjust the color balance.
a From the Color Balance menu on the printer control panel,
increase or decrease the values for cyan, magenta, yellow, and
black.
b Resend the print job.
Does the print still appear tinted?
The problem is
solved.
Contact
customer
support.
Troubleshooting 169

Lexmark CS317 Specifications

General

Brand	Lexmark
Model	CS317
Category	Printer
Language	English